You can upload a standby image/logo on the screen of the uniBOX unit. The image requirements are as follows: Meeting Management Software Format Resolution Confero png, jpg, jpeg 1920 x 1080 CoCon Room Configurator png, jpg, jpeg 1920 x 1080
You can upload a standby image/logo on the screen of the uniCOS unit. The image requirements are as follows: uniCOS F-MM7: Meeting Management Software Format Resolution Confero png, jpg, jpeg 1024 x 600 CoCon Room Configurator png, jpg, jpeg 1024 x 600 uniCOS PRO T (formerly T-MM10) and PRO F
You can upload a standby image/logo on the screen of the Confidea FLEX / Confidea FLEX G4. The image requirements are as follows: Meeting Management Software Format Resolution Confero png, jpg, jpeg 480 x 96 CoCon Room Configurator png, jpg, jpeg 480 x 96 Note that the screen resolution of the Confidea
When using the CoCon Room Configurator, you can upload a standby logo to display on the screen of your conference devices (when possible). The requirements are as follows: Device Format Resolution uniCOS F-MM7 png, jpg, jpeg 1024 x 600 uniCOS F-MM10 png, jpg, jpeg 1280 x 800 uniBOX png, jpg, jpeg 1920 x 1080
When using Confero, you can upload a standby image to display on the screen of your conference devices (when possible). Device Format Resolution uniCOS F-MM7 png, jpg, jpeg 1024 x 600 uniCOS T(F)-MM10 png, jpg, jpeg 1280 x 800 uniBOX png, jpg, jpeg 1920 x 1080 Confidea FLEX / FLEX G4* png, jpg, jpeg
The headphones will output the headphones floor (or loudspeaker floor if headphones floor is not present) regardless of the seat mapping in different groups.
Yes. Right now you, you can export/import the backup system configuration that contains all audio configurations. In a future version, it will be possible to export/import individual configurations.
The sensitivity of the individual microphone can be controlled from within the synoptic view. A permanent setting can be set as Technician, and the Operator or Chairperson can tune it during the meeting.
You can't increase the range, but you can increase the number of available channels in one room. The range is already very large, e.g. you can cover a whole stadium with only one AP4.
It can be done via the analog interface, via Dante, or via a mix of both.