Plixus Nameplate
Single-Sided Nameplate:
Double-Sided Nameplate:
- Plixus – Installation Guide (sections “Plixus Components”, “Installation Design” and “Installation Process”) – EN
- Plixus System: CE Declaration of Conformity – View
Master demo kit explainer (uniCOS F/MM 10, Plixus Nameplate):
If your system is running version 6.10 or earlier, you may notice bleeding or fading on the Nameplates. This can typically be improved by allowing the system to remain powered down for an extended period.
🔧 Follow these steps:
- Power down the entire Plixus system.
- Leave the system powered off for approximately two days.
- Power the system back on.
When the system restarts, it will resend the images to the Nameplates, which should noticeably improve the display quality.
💡 Note:
Starting from version 6.11.2, this issue has been addressed. The firmware of the nameplate has been improved with measures to prevent the bleeding or fading behavior without requiring any manual intervention.
With CoCon, you can upload a standby image/logo on the screen of the Plixus Nameplate. The image requirements are as follows:
| Meeting Management Software | Format | Resolution |
|---|---|---|
| CoCon Room Configurator | png, jpg, jpeg | 1024 x 600 |