D-Cerno
For discontinued D-Cerno products, click here.
Tabletop Units:
- 71.98.0315 – D-Cerno DECIDE – EN | FR | NL | DE | ES | IT
- 71.98.0396 – D-Cerno DISCUSS D – EN | FR | NL | ES | IT
- 71.98.0397 – D-Cerno DISCUSS C – EN | FR | NL | ES | IT
- (US market only) 71.98.1501 – D-Cerno D SL & D-Mic 40 SL – EN
- (US market only) 71.98.1502 – D-Cerno C SL & D-Cerno D SL & D-Mic 40 SL – EN
- (US market only) 71.98.1503 – D-Cerno D SL & D-Mic 50 SL – EN
- (US market only) 71.98.1504 – D-Cerno C SL & D SL & D-Mic 50 SL – EN
Flushmount Units:
- 71.98.0311 – D-Cerno F-DM – EN | FR | NL | DE | ES | IT
- 71.98.0312 – D-Cerno F-CM – EN | FR | NL | DE | ES | IT
- 71.98.0313 – D-Cerno F-DD – EN | FR | NL | DE | ES | IT
- 71.98.0314 – D-Cerno F-CD – EN | FR | NL | DE | ES | IT
Central Unit:
- 71.98.0322 – D-Cerno AE – EN | FR | NL | DE | ES | IT | PL
- 71.98.0360 – D-Cerno Advanced License – EN | FR | NL | DE | ES | IT | PL
- 71.98.0362 – D-Cerno L-DECIDE License – EN | FR | NL | DE | ES | IT
Network Extender:
- 71.98.0323 – D-Cerno NEXT – EN | FR | NL | DE | ES | IT | PL
- (US market only) – 71.98.1505 – D-Cerno NEXT & D-Cerno PS – EN
Power Supply:
Storage Case:
Manuals:
- D-Cerno system with D-Cerno AE central unit – User & Installation Guide – PDF | HTML
- Connecting D-Cerno AE With Third-Party DSP – PDF
- D-Cerno AE Advanced Audio Driver – PDF
- Camera Protocols for Confero & D-Cerno AE – PDF
- Integrating D-Cerno AE with Barco ClickShare CX-30 / CX-50 – PDF
Quick Guides:
D-Cerno API Documentation:
Important: Please, read the instructions provided in “Using D-Cerno Power Calculator” before using the D-Cerno Power Calculator tool.
ℹ️ Please note that the D-Cerno Power Calculator uses the max. power consumption. The datasheets show the nominal consumption.
- D-CERNO AE System – EN
- 71.98.0311 – D-CERNO F-DM – pdf | dwg
- 71.98.0312 – D-CERNO F-CM – pdf | dwg
- 71.98.0313 – D-Cerno F-DD – pdf | dwg | stp
- 71.98.0314 – D-Cerno F-CD – pdf | dwg | stp
- 71.98.0315 – D-Cerno DECIDE – pdf | dwg
- 71.98.0322 – D-CERNO AE – pdf | dwg
- 71.98.0323 – D-CERNO NEXT – pdf | dwg
- 71.98.0334 – D-Cerno AE TC – pdf
- (Webinar) Brand new digital discussion system D-Cerno – View
Below is a list of handsfree and mix-minus limitations for D-Cerno.
Please, keep in mind the following:
- Static mix-minus: during the configuration, each seat gets pre-assigned a dedicated mix-minus channel.
- Dynamic mix-minus:
- The assigned channels for seats with a microphone that is still open are preserved.
- When a new microphone is activated, a channel is assigned to it based on the number of remaining free channels.
- When a microphone deactivates, its channel returns to the pool of free channels.
- A microphone cannot become active if the maximum number of open microphones has been reached. A microphone that is still open must be switched off first.
| Default normal routing | Handsfree mode Mix-minus + Floor | Handsfree mode + Mix-minus + Floor + Floor HP | Other microphone modes + Mix-minus + Floor | Other microphone modes + Mix-minus + Floor + Floor HP | |
|
Max. number of seats |
250 | 250 | 250 | 250 |
250 |
|
Max. number of open microphones (inc. chairpersons & VIPs) |
16 (12 delegates, 4 Chairpersons / VIPs)** |
16 | 15 | 16 |
15 |
| Seats that generate audio |
1-16 |
1-16 | 1-15 | – |
– |
|
Type of mix-minus |
– | Static* | Static* | Dynamic |
Dynamic |
* Static mix-minus is due to a hardware limitation
** 12 delegates maximum. The number of chairpersons / VIPs can be higher than 4 if the number of delegates is lower than 12.
Forgot the default IP address for your device? Check the list below.
| Device | Default IP Address |
|---|---|
| Confidea WAP G4 | 192.168.0.110 |
| Confidea CHT G4 | 192.168.0.120 |
| D-Cerno AE | 192.168.0.20 |
| D-Cerno CUR | 192.168.0.20 |
| Lingua IR Transmitter | 192.168.0.140 |
| Lingua CHT | 192.168.0.150 |
| Plixus AE-R | 192.168.0.100 |
| Plixus MME | 192.168.0.100 |
| Unite AP4 | 192.168.1.101 |
| Unite CC, CC-28/2, CC 36-2, CR, CDD, CDS and DS | 192.168.1.101 |
⚠️ The D-Cerno DECIDE devices are compatible exclusively with the D-Cerno AE central unit running version 1.6.1 or higher.
If the D-Cerno AE is running a 1.5.2 version or below, follow the procedure below to avoid the risk of a critical error.
- Disconnect the D-Cerno DECIDE units from the network.
- Power cycle the D-Cerno AE central unit.
- Upgrade the central unit to version 1.5.3 or above. Please note that version 1.5.3 allows the full system to be updated, but does not recognize the D-Cerno DECIDE devices. If you want to the D-Cerno DECIDE to be recognized, directly upload to version 1.6.1 or higher.
- Reconnect the D-Cerno DECIDE units.
- Upgrade the full system.
✅ Visit D-Cerno’s Software Update page and download the Update Procedure for more details on how to update your D-Cerno system.